HKS Dual Resonated Front Pipe

HKS Dual Resonated Front Pipe Review

I recently installed an HKS Dual Resonated Front Pipe because my exhaust set up has been filled with obstacles and headaches. The short version of my issues is that my catless/unresonated Invidia front pipe sounds raw and super aggressive, but is way too raspy when paired with a catless header (see comparison video below). The...

FR-S tomei uel header

Tomei Expreme UEL Header Review

The header is one of the biggest, if not THE biggest area to increase power on a naturally aspirated FR-S/86/BRZ. Other exhaust modifications do make a little bit of power, but do more for sound than anything else - the header is a different story. When selecting a header for the FR-S/86/BRZ, there are...

Motul Gear 300 | Review

With roughly 30,000 miles on the odometer, the time has come to swap out the transmission and differential fluid on the MPmoto FR-S. It probably wasn't absolutely necessary to change the fluid at this point based on the amount of metal shavings on the magnetic drain plugs, and I haven't had much issue with...

FR-S Interior Raceseng Circuit Sphere 100 Shift Knob

Raceseng Circuit Sphere 100 | Shift Knob

A month or two ago I set out to replace my BLOX Racing Shift knob because it had turned pink... after less than a year... because it's not very good. I decided that I wanted to replace it with a shift knob that looked retro, and I refused to pay the ridiculous $150 asking...

MPmoto DIY Shifter Extension

MPmoto Shifter Extension

I've been driving around with the Torque Solution 3" Billet Shifter Extension for a few days now and my initial feelings about it have definitely changed. 3" is too tall in this car. It looks somewhat clownish/boy racer/ricer which isn't at all what I'm going for. Additionally, it feels sloppy. It feels like the...

Torque Solution Shifter Extension

Torque Solution Billet 3″ Shifter Extension | Reviewed

After watching some YouTube videos about classic cars, I was noticing how nice shifters used to look with long thin shift levers and simple spherical shift knobs. Since I already have a retro-looking shift knob, I decided to top it off with a more retro looking shift lever. Doing so would also help with an...

Modern Billet Shift Knob vs. BLOX Racing Shift Knob

Modern Billet Shift Knob | Not Just For Mustangs

After watching some YouTube videos about classic cars, I was noticing how nice shifters used to look with long thin shift levers and simple spherical shift knobs. Since I already have a retro-looking shift knob, I decided to top it off with a more retro looking shift lever. Doing so would also help with an...

FR-S Fujistubo Bumper Exhaust Hole Cover

Fujitsubo Bumper Exhaust Hole Cover | FR-S / BRZ / 86

My viewpoint on installing a single exit exhaust system on a vehicle that came from the factory with dual exits is probably the minority view. I’m all for it. In fact, I went the single exhaust route on both, my 350Z and now my FR-S because of the simplicity, weight savings, and cost. The...

Scroll to top